$1,395.00 1644g

Huck

$1,395.00 1644 grams

Huck: The Huck is our no compromise trail and enduro wheel. With an all mountain layup, 32H drilling, and employing 3D wound carbon construction, these wheels remain remarkably light but also very durable.

The rim is 28mm deep, 40mm wide, 30mm internal with shallow hookless bead.  At 5mm wide, the beads are double the width of the industry standard,. Their rounded, “soft” profile that has proven to be extremely effective at preventing pinch flats and sidewall cuts at even very low pressures.

The rims have in-molded spoke holes, not drilled, which increases strength. The rounded sidewall and square aspect ratio is designed to allow flex from the spoke bed up, while the build tension from spokes to hub delivery excellent stiffness. The result is a nearly indestructible, soft riding, snappy wheelset that will perform going uphill or downhill. 

The huck is built 32H 3 cross front and rear using Sapim Race spokes in standard build. We can customize with a stiffer spoke upon request.

Build spec info.

Configure your wheels with one of the many hubs we offer.

Dive deep into why we offer these hubs in this post.


 

DT Swiss 240

Very light, DT driver with 36 point engagement, straight pull spokes, centerlock (in disc), upgraded non ceramic bearings (vs DT 350). Both front and rear hubs have an internal axle, end caps go over the axle and do not contact bearings. Muted freehub sound. Available in black only. Made in Taiwan.


 

DT Swiss 350

DT driver with 18 point engagement, straight pull spokes, centerlock (in disc). Front hub has no internal axle, bearings ride directly on through axle or end caps. Lower quality bearings than DT 240. Muted freehub sound. Available in black only. Made in Taiwan.

Hope RS4

Road version of Hope Pro 4. 44 point engagement with 2 pawls for lower weight and drag vs 6 pawls in MTB hub. Good bearings, good freebhub seals, loud ratcheting sound. Not super light weight. Available in a range of colors. Made in UK.


 

Hope Pro4 / RS4 Disc

Hope disc hub, centerlock, 44 point engagement with 4 pawls for additional strength (MTB Pro4) or 2 pawls in road disc version (RS4 disc). Good bearings, good freebhub seals, loud ratcheting sound. Not super light weight. Available in a range of colors. Made in UK.

Hope Fatsno

Hope fat bike disc hub, 6 bolt, 44 point engagement with 4 pawls for additional strength (MTB Pro4). Good bearings, good freebhub seals, loud ratcheting sound. Available in a range of colors. Made in UK.


 

Industry 9 Torch

I9 MTB or road disc hub, centerlock, 120 point engagement for very fast pick up. Quite light. Good bearings, teflon wiper seal for good protection and low drag. Buzzy freehub sound. Full range of colors available. Made in USA.

 

Project 321

Beautiful hubs, top quality machining and finish, 6 bolt disc only, angular contact bearings with precise preload adjustment, threaded end caps, large hub flanges, angled flanges to match spoke angle, almost no spoke to hub contact, tension up like a straight pull. Magnetic pawls, 216 point freehub, no springs in freehub. Loud or silent options.  Made in Bend, OR. Comparable to Chris King quality.

NEXT Straight Pull 

Very light, aero, sleek straight pull hub, 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT J Bend

Light, J bend (regular) spoked version of NEXT hub. Used in alloy training wheels or upon request. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT Disc Brake

Light, J bend (regular) spoked NEXT disc hub. Centerlock design. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in several colors. Made in Taiwan.

Regular price $1,395.00

Huck: The Huck is our no compromise trail and enduro wheel. With an all mountain layup, 32H drilling, and employing 3D wound carbon construction, these wheels remain remarkably light but also very durable.

The rim is 28mm deep, 40mm wide, 30mm internal with shallow hookless bead.  At 5mm wide, the beads are double the width of the industry standard,. Their rounded, “soft” profile that has proven to be extremely effective at preventing pinch flats and sidewall cuts at even very low pressures.

The rims have in-molded spoke holes, not drilled, which increases strength. The rounded sidewall and square aspect ratio is designed to allow flex from the spoke bed up, while the build tension from spokes to hub delivery excellent stiffness. The result is a nearly indestructible, soft riding, snappy wheelset that will perform going uphill or downhill. 

The huck is built 32H 3 cross front and rear using Sapim Race spokes in standard build. We can customize with a stiffer spoke upon request.

Build spec info.

Configure your wheels with one of the many hubs we offer.

Dive deep into why we offer these hubs in this post.


 

DT Swiss 240

Very light, DT driver with 36 point engagement, straight pull spokes, centerlock (in disc), upgraded non ceramic bearings (vs DT 350). Both front and rear hubs have an internal axle, end caps go over the axle and do not contact bearings. Muted freehub sound. Available in black only. Made in Taiwan.


 

DT Swiss 350

DT driver with 18 point engagement, straight pull spokes, centerlock (in disc). Front hub has no internal axle, bearings ride directly on through axle or end caps. Lower quality bearings than DT 240. Muted freehub sound. Available in black only. Made in Taiwan.

Hope RS4

Road version of Hope Pro 4. 44 point engagement with 2 pawls for lower weight and drag vs 6 pawls in MTB hub. Good bearings, good freebhub seals, loud ratcheting sound. Not super light weight. Available in a range of colors. Made in UK.


 

Hope Pro4 / RS4 Disc

Hope disc hub, centerlock, 44 point engagement with 4 pawls for additional strength (MTB Pro4) or 2 pawls in road disc version (RS4 disc). Good bearings, good freebhub seals, loud ratcheting sound. Not super light weight. Available in a range of colors. Made in UK.

Hope Fatsno

Hope fat bike disc hub, 6 bolt, 44 point engagement with 4 pawls for additional strength (MTB Pro4). Good bearings, good freebhub seals, loud ratcheting sound. Available in a range of colors. Made in UK.


 

Industry 9 Torch

I9 MTB or road disc hub, centerlock, 120 point engagement for very fast pick up. Quite light. Good bearings, teflon wiper seal for good protection and low drag. Buzzy freehub sound. Full range of colors available. Made in USA.

 

Project 321

Beautiful hubs, top quality machining and finish, 6 bolt disc only, angular contact bearings with precise preload adjustment, threaded end caps, large hub flanges, angled flanges to match spoke angle, almost no spoke to hub contact, tension up like a straight pull. Magnetic pawls, 216 point freehub, no springs in freehub. Loud or silent options.  Made in Bend, OR. Comparable to Chris King quality.

NEXT Straight Pull 

Very light, aero, sleek straight pull hub, 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT J Bend

Light, J bend (regular) spoked version of NEXT hub. Used in alloy training wheels or upon request. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT Disc Brake

Light, J bend (regular) spoked NEXT disc hub. Centerlock design. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in several colors. Made in Taiwan.