$1,795.00 1588g

Fast Disc

$1,795.00 1588 grams
Regular price $1,795.00

Fast Disc: The Fast Disc is deeper than the Quick at 55mm, in a disc brake specific rim that comes into its own at the speeds that you encounter in road and criterium racing with an emphasis on reduced aero drag. At a depth comparable to a Zipp 404, they still handle well in all but the worst wind conditions while providing an aero and stiffness advantage over the Quick. The rims on both models are 25mm wide external with a 19.5mm...Show More >

Fast Disc: The Fast Disc is deeper than the Quick at 55mm, in a disc brake specific rim that comes into its own at the speeds that you encounter in road and criterium racing with an emphasis on reduced aero drag. At a depth comparable to a Zipp 404, they still handle well in all but the worst wind conditions while providing an aero and stiffness advantage over the Quick. The rims on both models are 25mm wide external with a 19.5mm internal width, optimized for a 24mm to 26mm tire width.

The Fast disc brake version is built 24H two cross front and rear using Sapim CX Ray spokes in standard build. We can customize with a stiffer spoke upon request.

All wheels come with a high pressure rim strip installed for conventional inner tubes. Quick release wheels will be provided with NEXT steel rod skewers for added security with disc brakes. Through axles are not provided with wheels as they are part of the bike frame system.


< Show Less
Build spec info.

Configure your wheels with one of the many hubs we offer.

Dive deep into why we offer these hubs in this post.


 

DT Swiss 240

Very light, DT driver with 36 point engagement, straight pull spokes, centerlock (in disc), upgraded non ceramic bearings (vs DT 350). Both front and rear hubs have an internal axle, end caps go over the axle and do not contact bearings. Muted freehub sound. Available in black only. Made in Taiwan.


 

DT Swiss 350

DT driver with 18 point engagement, straight pull spokes, centerlock (in disc). Front hub has no internal axle, bearings ride directly on through axle or end caps. Lower quality bearings than DT 240. Muted freehub sound. Available in black only. Made in Taiwan.

Industry 9 Torch

I9 MTB or road disc hub, centerlock, 120 point engagement for very fast pick up. Quite light. Good bearings, teflon wiper seal for good protection and low drag. Buzzy freehub sound. Full range of colors available. Made in USA.

Project 321

Beautiful hubs, top quality machining and finish, 6 bolt disc only, angular contact bearings with precise preload adjustment, threaded end caps, large hub flanges, angled flanges to match spoke angle, almost no spoke to hub contact, tension up like a straight pull. Magnetic pawls, 216 point freehub, no springs in freehub. Loud or silent options.  Made in Bend, OR. Comparable to Chris King quality.

NEXT Straight Pull 

Very light, aero, sleek straight pull hub, 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT Disc Brake

Light, J bend (regular) spoked NEXT disc hub. Centerlock design. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in several colors. Made in Taiwan.

Fast Disc: The Fast Disc is deeper than the Quick at 55mm, in a disc brake specific rim that comes into its own at the speeds that you encounter in road and criterium racing with an emphasis on reduced aero drag. At a depth comparable to a Zipp 404, they still handle well in all but the worst wind conditions while providing an aero and stiffness advantage over the Quick. The rims on both models are 25mm wide external with a 19.5mm...Show More >

Fast Disc: The Fast Disc is deeper than the Quick at 55mm, in a disc brake specific rim that comes into its own at the speeds that you encounter in road and criterium racing with an emphasis on reduced aero drag. At a depth comparable to a Zipp 404, they still handle well in all but the worst wind conditions while providing an aero and stiffness advantage over the Quick. The rims on both models are 25mm wide external with a 19.5mm internal width, optimized for a 24mm to 26mm tire width.

The Fast disc brake version is built 24H two cross front and rear using Sapim CX Ray spokes in standard build. We can customize with a stiffer spoke upon request.

All wheels come with a high pressure rim strip installed for conventional inner tubes. Quick release wheels will be provided with NEXT steel rod skewers for added security with disc brakes. Through axles are not provided with wheels as they are part of the bike frame system.


< Show Less
Build spec info.

Configure your wheels with one of the many hubs we offer.

Dive deep into why we offer these hubs in this post.


 

DT Swiss 240

Very light, DT driver with 36 point engagement, straight pull spokes, centerlock (in disc), upgraded non ceramic bearings (vs DT 350). Both front and rear hubs have an internal axle, end caps go over the axle and do not contact bearings. Muted freehub sound. Available in black only. Made in Taiwan.


 

DT Swiss 350

DT driver with 18 point engagement, straight pull spokes, centerlock (in disc). Front hub has no internal axle, bearings ride directly on through axle or end caps. Lower quality bearings than DT 240. Muted freehub sound. Available in black only. Made in Taiwan.

Industry 9 Torch

I9 MTB or road disc hub, centerlock, 120 point engagement for very fast pick up. Quite light. Good bearings, teflon wiper seal for good protection and low drag. Buzzy freehub sound. Full range of colors available. Made in USA.

Project 321

Beautiful hubs, top quality machining and finish, 6 bolt disc only, angular contact bearings with precise preload adjustment, threaded end caps, large hub flanges, angled flanges to match spoke angle, almost no spoke to hub contact, tension up like a straight pull. Magnetic pawls, 216 point freehub, no springs in freehub. Loud or silent options.  Made in Bend, OR. Comparable to Chris King quality.

NEXT Straight Pull 

Very light, aero, sleek straight pull hub, 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in black only. Made in Taiwan.

NEXT Disc Brake

Light, J bend (regular) spoked NEXT disc hub. Centerlock design. 48 point engagement with 6 pawls. Good bearings riding on internal axles front and rear with threaded end caps. Very easy disassembly for service. Quiet freehub. Available in several colors. Made in Taiwan.